Hot Stamping Die Artwork to be mounted with Heat Tape
Flag AFM Engineering, Inc. Contact US   Flag
Hot Stamping Die Artwork to be mounted with Heat Tape
AFM Engineering HOT STAMPING PAD PRINTING ULTRASONIC WELDING
Applications Lab Automation Consulting Machine Accessories New Machinery Production Services
Machinery Rebuilding Replacement Parts Service Tooling Used Machinery Vendor Information
Skip Navigation Links.
We accept
Master Card   Visa Card
We ship
FedEx  UPS
We proudly use the following Software:
Adobe Illustrator 
Adobe Illustrator 2023
AutoCad 
AutoCad 2023
AutoCad Electrical 
AutoCad Electrical 2023
Cimatron 
Cimatron E16
Corel Draw 
Corel Draw 2023
Encapsulated PostScript 
Encapsulated PostScript 2023
Solidworks 
Solidworks 2023
Refund/Return Policy
Privacy Policy
AFM Engineering> Hot Stamping> Hot Stamping Information> Hot Stamping Die Artwork and Mounting Solutions> Hot Stamping Die Artwork to be mounted with Heat Tape
Hot Stamping Die Artwork and Mounting Solutions

HEAT TAPE OPERATION FOR METAL AND RUBBER DIES
Buy Now
1. Heat machine up to at least 300 degrees.
2. Put die on part and position under hot stamp head.
3. Cycle machine to make sure that the head comes in contact with the die.
4. Put the machine in "set up" mode.
5. Put heat tape all over the die. Make sure that there are no wrinkles.
6. Cycle the head down and count to 20. Then turn the "set up" off to let the head return.
7. Count to 20 with the head up. This will allow the heat tape and die to heat up.
8. Put the machine in "set up" again and cycle the head and count to 20. Then turn off the
"set up" switch to let the head return.
9. Set the machine to the run mode and begin production.
10. When using a silicone rubber, be sure to engage the depth stop. Set the stop so the die CANNOT touch the part that you are stamping. One way to do this is to turn off the air. The head will drop down onto the part. Then turn the stop clockwise until it can no longer turn. Next, turn the air back on. Then turn the stop (1) full turn clockwise. When you cycle the press you should get a faint print. Finally; turn the stop to fine tune the machine.

Bag Printing
Picture10001
Y Printing
Picture10002
Cylinder Printing
Picture10003
Contoured Part
Picture10004
Digital Heat Transfer
with consecutive numbers

Picture10005
Digital Heat Transfer
on Vacuum Formed Tray

Picture10006

Crate Printing

Picture10007
Digital Heat Transfer
on Cup

Picture10008
Bucket Printing
Child Warning Label

Picture10009
Golf Disc Printing
Picture10010
SERVING THE PLASTICS INDUSTRY SINCE 1979 WITH SYSTEMS
AND SERVICES FOR SECONDARY FINISHING OPERATIONS