AFM Engineering, Inc.
Model 14 Hot Stamping Machine |
| Model 14 Control Box Manual |
The
Mini Hot Stamper Model 14 is designed specifically for hot stamping small medical
parts in a clean room. The Mini Hot Stamper should be considered for
printing on Luer "Y" and "T" fittings where lot code,
product code and date codes are required.
Features:
|
Small Footprint:
Height 38”, Width 24”, Depth 12” |
|
Pneumatic System is Designed to Run Dry |
|
All Aluminum Surfaces are Anodized Black |
|
All Hardware is Stainless Steel |
|
Microprocessor Controlled
with Touch Screen
|
Print Time |
|
Foil Delay Time |
|
Foil Advance Time |
|
|
Digital Temperature Controller with
Solid State Relay |
|
Clean Room Ready |
|
Light Touch Palm Buttons |
|
Micrometer Depth Stop |
|
Dovetail Die Holder |
|
Accurate Electrical Foil Advance |
Options:
|
Side to Side Slide |
|
Light Curtain |
|
Numbering Heads |
|
3” X 6” 600 watt Heater Head |
|
Head Up Delay |
|
Foil Backup |
|
Heat Transfer Indexer (Decal) |
|
X-Y-R Locating Table |
|
Specifications:
Power Input: 120 VAC 5 amp 50/60 Hz.
(optional 220 VAC 2.5 amp 50/60 Hz.) |
Air Supply: 100 PSIG at 0.5 CFM
Clean Dry Air |
| Dimensions: Height 38”, Width 24”, Depth 12” |
| Weight: 60 lbs. |
| Temperature Range: 200 to 600°F. |
| Digital Control with Solid State Relay |
| Printing Pressure: 50 to 500 lbs. |
| Printing Time: 0.001 to 9.999 Digital Control |
| Foil Delay Time: 0.001 to 9.999 Digital Control |
| Foil Pull Time: 0.001 to 9.999 Digital Control |
Print Head Size: 2” X 4” 350 watt
(optional 3” X 6” 600 watt) |
|
|
|
|