| The Mini Hot Stamper Model 12 with Peripheral Marker Attachment |
|
|
The Mini Hot Stamper Model 12 with Peripheral Marker
Attachment is designed specifically for hot stamping
small diameter medical parts in a clean room.
The Mini Hot Stamper with Peripheral Marker Attachments
should be considered for printing round parts from 1/4 to 3/4
inch diameter 90 to 360 degrees.
Features
|
Small Footprint:
Height 38”, Width 24”, Depth 12” |
|
Pneumatic System is Designed to Run Dry |
|
All Aluminum Surfaces are Anodized Black |
|
All Hardware is Stainless Steel |
|
Light Weight-60 lbs. |
|
Microprocessor Controlled
|
Down Time |
|
Foil Delay Time |
|
Foil Advance Time |
|
|
Digital Temperature Controller with
Solid State Relay |
|
Clean Room Ready |
|
Light Touch Palm Buttons |
|
Micrometer Depth Stop |
|
Dovetail Die Holder |
|
Accurate Electrical Foil Advance |
Options
|
Side to Side Slide |
|
Light Curtain |
|
Numbering Heads |
|
3” X 6” 600 watt Heater Head |
|
Specifications
|
Power Input: 120 VAC 5 amp 50/60 Hz.
(optional 220 VAC 2.5 amp 50/60 Hz.) |
|
Air Supply: 100
PSIG at 0.5 CFM
Clean Dry Air |
|
Dimensions: Height 38”, Width 24”, Depth
12” |
|
Weight 60
lbs. |
|
Temperature Range: 200 to 600°F. |
|
Digital Control with Solid State
Relay |
|
Printing Pressure: 50 to 500 lbs. |
|
Printing Time: 0.001 to 9.999 Digital
Control |
|
Foil Delay Time: 0.001 to 9.999 Digital
Control |
|
Foil Pull Time: 0.001 to 9.999 Digital
Control |
|
Print Head Size: 2” X 4” 350 watt
(optional 3” X 6” 600 watt) |
|
|
|
|
|