| AFM
Engineering, Inc. |
| Virtual Machine Service Service and Training. |
| AFM Part# 105109 Price $350.00 Ea includes 2 hours |
| To make sure you get the most out of your time we recommend the following: |
| 1. | Make sure all devices that are being used during the meeting are connected to your Wi-Fi. |
| 2. | If you want to record the meeting make sure you know how and are ready to record: |
| 3. | If you are doing this meeting at your machine make sure you can get around the machine so we can see everything. |
| 4. | It's best if you have one person to operate the camera. They need to be able to get all arount the machine and hold the camera steady. |
| 5. | Make sure the sound level around the machine is low enough that eveyone attending the meeting can hear the camera. |
| 6. | Make sure that we can hear you on our side of the meeting. |
| 7. | Try to have any tools we may need available. (See List below) |
|
| Recommeded tool list for Hot Stamp Machine: |
| 1. | Complete Hex Key Allen Wrench Set (Inch) Set (Inch). McMaster_Carr |
| 2. | Complete Phillips-Head Screwdriver Set. McMaster_Carr |
| 3. | Complete Standard Screwdriver Set. McMaster_Carr |
| 4. | SAE Combination Wrench Set. (Inch) |
| 5. | Adjustable Wrench Set. McMaster_Carr |
| 6. | Multimeter (OHM and AC Voltage). |
| 7. | Needle Nose Pliers. |
| 8. | Diagonal Cutting Pliers. |
|
|
|
|
|